JLG X23J - X700AJ Service Manual - Manual (Page 77)

SECTION 3 - CHASSIS & TURNTABLE
3-50 – JLG Lift – 3121448
22. Assemble the brake shaft (19).
Figure 3-141.
23. Assemble the brake discs package according to the
following order: firstly, insert one steel disc with
external teeth (21).
Figure 3-142.
24. Then insert, an internally toothed sintered bronze
disc (20). Repeat the operation untill all 7 sintered
bronze discs and 8 steel discs have been assem-
bled.
Figure 3-143.
25. Apply in the seals' seats, inside the flanged hub (15)
a thin oil film and assemble the O-ring seals (23-24)
and the back-rings (22-25).
Figure 3-144.
INFORMATION THE O-RING SEALS (A) AND A THE
BACKUP RINGS (B) MUST BE FITTED IN THE SEATS