JLG X23J - X700AJ Service Manual - Manual (Page 75)

SECTION 3 - CHASSIS & TURNTABLE
3-48 – JLG Lift – 3121448
12. By using pliers, place the circlip (8) into its seat in
the flanged hub (15).
Figure 3-131.
13. Place correctly the planet assemblies (7) on the
flanged hub (15).
Figure 3-132.
14. By using a rubber hammer and a stopper, push the
planet assemblies (7) against the flanged hub pin
shoulders (15).
Figure 3-133.
15. By using pliers, assemble the circlips (6) in the
flanged hub pin seats (15).
Figure 3-134.