JLG X23J - X700AJ Service Manual - Manual (Page 56)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-29
15. Place the wrench into the plug (2), jack and remove
the end cover (4).
Figure 3-48.
16. By using a puller remove the pad (3) from the end
cover (4).
INFORMATION
THE ABOVE OPERATION MUST BE EXECUTE ONLY
IN CASE OF REPLACEMENT OF THE PAD.
Figure 3-49.
17. Remove the O-ring seal (5) from its seat in the gear-
box housing (9).
Figure 3-50.
18. By using pliers remove the circlips (6) from the
planet assemblies (7).
Figure 3-51.
19. By using a puller remove the planet assemblies (7).
Figure 3-52.