JLG X23J - X700AJ Service Manual - Manual (Page 123)

SECTION 3 - CHASSIS & TURNTABLE
3-96 – JLG Lift – 3121448
20. By using a rubber hammer push the cover (4) against
the gearbox housing shoulder (10).
21. Fit the elastic ring (1) into its seat in the gearbox hous-
ing (10).
22. Fill the gearbox with the lubricant oil.
Insert the plugs (2) into the oil draining-filling holes of the
end cover (4).Tighten the plugs by a torque wrench at 20
÷ 30 Nm torque.
FINAL TEST AND REINSTALLATION
Check the product by remounting it to the machine.
Check the function of the transmission.