JLG X23J - X700AJ Service Manual - Manual (Page 111)

SECTION 3 - CHASSIS & TURNTABLE
3-84 – JLG Lift – 3121448
11. Insert the swash plate (M10) inside the flanged hub
(M2) being careful that spherical housings matches with
the 2 steel balls (M3).
12. Assemble the nos.3 pins (M15) in their seats in the
cylinder block (M16).
13. Assemble the spherical retainer holder (M13) on the
cylinder block (M16).
THE TWO SPLINES MUST BE ALIGNED TOGETHER.
14. Piston orifice (M11) must be open and free of dust or
dirt.
15. Assemble correctly the nos.9 pistons (M11) in the
retainer plate (M12).
16. Assemble the pistons-retainer plate unit (M11M12) in
the cylinder block (M16).