JLG X23J - X700AJ Service Manual - Manual (Page 297)

SECTION 3 - CHASSIS & TURNTABLE
3-270 – JLG Lift – 3121448
OPERATION
ENGINE OIL
Oil quality
Qualified are all trademark oils which fulfil at least one of
the following specifications:
ACEA – B2 / E2 or more significant
API – CD / CE / CF / CF-4 / CG-4or more significant.
If engine oil of a poorer quality is used, reduce oil change
intervals to 150 hours of operation.
Oil viscosity
Select the viscosity class according to the ambient tem-
perature for cold starts.
When adding oil or checking the oil level, the engine must
be horizontal.
Remove oil filler screw and add engine oil.
Lubricating oil capacity: see Chapter Technical data.
To check the oil level, remove the dipstick, clean it - then
screw it back in and finally remove it again.
Check the oil level on the dipstick and, if necessary, top
up to the max.level.
y
-40
-30
-20
-10
0
10
20
30
40
50
104
86
68
50
32
14
-4
-22
-40
OIL: SAE... °C °F
5W/30
5W/40
1
0
W/40
1
0
W/30
1
5
W/40
30
40
122
10
W
max.