JLG X23J - X700AJ Service Manual - Manual (Page 59)

SECTION 3 - CHASSIS & TURNTABLE
3-32 – JLG Lift – 3121448
HYDRAULIC MOTOR DISASSEMBLY
1. Unscrew the 2 socket head screws M5x40 (55)
grade 10.9, which fix the counterbalance valve to the
hydraulic motor.
Figure 3-61.
2. Remove the counterbalance valve.
Figure 3-62.
3. Place the hydraulic motor on the support with the
output side downwards. Unscrew the 7 exagonal
head screws M8 (43), grade 10.9, and remove the
washers (42).
Figure 3-63.
4. Remove the motor cover (41).
Figure 3-64.
5. Remove the O-ring seal (38) from the motor cover
(41).
Figure 3-65.