JLG X23J - X700AJ Service Manual - Manual (Page 542)

SECTION 6 - JLG CONTROL SYSTEM
3121448 – JLG Lift – 6-53
SETUP 3 - OPTIONAL
This menu allows the setting of those options:
1. Foot Pedal
2. Motion Alarm
3. Drive Speed
4. Power electrical Motor
5. Lamps on Outrigger
1 - FOOT PEDAL
1. Press button 7 "SETUP“.
2. Press button 5 “PASSWORD”.
Using the remote control buttons to enter the pass-
word 4771.
NOTE: password above allow to choose the options shown
on the screen.
Once the correct password is accepted the display
shown “OK”.
3. Press button 9 “ESC”
Repeat the above steps if “NO” appear on the dis-
play.
4. Press button 3”OPTIONAL”.
5. Press button 1 “PEDAL”.
6. Press button 1 ON to actvate the “PEDAL”.
7. Press button 2 “OFF to deactivate the Pedal”.
Press 4 times button 9 to Esc to escape.