JLG X23J - X700AJ Service Manual - Manual (Page 76)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-49
16. Fit the O-ring seal (5) into its seat in the gearbox
housing (9).
Figure 3-135.
17. Place the pad (3) on the end cover (4) and by using
a puller push it against the shoulder untill assem-
bling is complete.
Figure 3-136.
18. Place the end cover (4) on the gearbox housing (9).
Figure 3-137.
19. By using pliers, place the circlip (1) into its seat in
the gearbox housing (9).
Figure 3-138.
20. Turn the gearbox upside down and insert the sun
gear (17).
Figure 3-139.
21. By using pliers, assemble the cir clip (18) into its
seat in the brake shaft (19).
Figure 3-140.