JLG X23J - X700AJ Service Manual - Manual (Page 463)

SECTION 5 - HYDRAULICS
3121448 – JLG Lift – 5-37
Automatic reductions drive speed (X23J-
X700AJ only)
Adjust pressure reducing valve (only X23J-X700AJ)
1. Adjust the pressure when the machine is
completely closed.
Figure 5-105.
2. Install the pressure gauge at the port 5.
3. Activate the function outrigger IN on remote control
1.
4. Verify that the pressure is as on Table below.
5. Pressure adjust on relief valve point 6
Control Valve Turntable Functions
1. Machine with outrigger fully extended.
Figure 5-106.
2. Install the pressure gauge at the port marked MB
Figure xx.
3. Activate the function Telescope IN on remote con-
trol.
4. Verify that the pressure is as on Table below.
Automatic reductions drive speed
Model Pressure
Port
Function Pressure setting
Bar PSI
X23J
X700AJ
Point 5 Function
Outrigger IN
26 380
0,2 A 3,23,2
B B B B
APPOGGIO_POST
Control Valve Turntable Functions
Model Pressure
Port
Function Pressure setting
Telescope IN Bar PSI
X17J
MB
Telescope IN
Basket Control
210 3050
Telescope IN
Ground Control
180 2600
X14JH Telescope IN
Basket Control
210 3050
Telescope IN
Ground Control
180 2600
X23J
X700AJ
Telescope IN
185 2680
X19J
X550AJ
215 3120
X14J
X390AJ
165 2400