JLG X23J - X700AJ Service Manual - Manual (Page 122)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-95
14. By using a rubber hammer and a metal stopper, push
the planet assemblies of the 2nd reduction (9) against the
hydraulic motor pin shoulders (17).
15. By using pliers, assemble the circlips (8) in the hydrau-
lic motor pin seats (17).
16. Insert the 1st reduction assembly (7).
17. Insert the 1st reduction sun gear (6).
18. Fit the O-ring seal (5) into its seat in the gearbox hous-
ing (10).
19. Place the end cover (4) on the gearbox housing (10).