JLG X23J - X700AJ Service Manual - Manual (Page 223)

SECTION 3 - CHASSIS & TURNTABLE
3-196 – JLG Lift – 3121448
SPECIFICATIONS
DIMENSIONS AND WEIGHT
ENGINE
Model iGX440U
PTO types S Q V
Overall length 407 mm (16.0 in) 433 mm (17.0 in) 450 mm (17.7 in)
Overall width 505 mm (19.9 in)
Overall height 454 mm (17.9 in)
Maximum angle of inclination 20°
Dry weight 39 kg (86 lbs)
Operating weight 45 kg (99 lbs)
Model iGX440U
Description code GCAWK
Type 4-stroke, overhead camshaft, single cylinder, inclined by 15°
Displacement
438 cm 3 (26.7cu-in)
Bore x stroke 88.0 x 72.1 mm (3.46 x 2.84 in)
Maximum horsepower
11.2 kW (15.2 PS) / 3,600 min -1 (rpm)
Recommended maximum operation bhp
8.0 kW (10.8 PS) / 3,600 min -1 (rpm)
Maximum torque
29.8 N·m (3.0 kgf·m, 22 lbf·ft)/2,500 min -1 (rpm)
Compression ratio 8.1 : 1
Minimum fuel consumption 328 g/kW·h (241 g/PS·h, 0.53 lb/PS·h)
Ignition system CDI
Ignition timing (at no load)
10° B.T.D.C./1,400 min -1 (rpm)
13° B.T.D.C./3,600 min -1 (rpm)
Spark plug BKR7E-E (NGK), K22PR-UR (DENSO)
Lubrication system Forced splash type
Oil capacity 1.10 l (1.16 US qt, 0.97 lmp qt)
Cooling system Forced air
Starting system Recoil and starter motor
Stopping system Ignition primary circuit open
Carburetor Horizontal type batter fly valve
Air cleaner Dual element type
Governor STR (Self Tuning Regulator) governor
Fuel used Unleaded gasoline with a pump octane rating 86 or higher
Fuel tank capacity 6.5 l (1.72 US gal, 1.43 lmp gal)