JLG X23J - X700AJ Service Manual - Manual (Page 84)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-57
INSTALLATION INFORMATION
INSTALLATION PROCEDURE
Before proceeding with installation, follow the instructions
given below.
• Properly clean the product by removing packaging
and all remains of protection padding.
• Prepare the parts to be coupled using the installation
drawing as a guide.
The main installation processes are given below. In the fol-
lowing sections, the procedures to follow are given in
detail.
– Installation of the track drive on the machine.
– Sprocket fixing to the track drive.
– Connecting the hydraulic system.
– Filling-up the gearmotor with lubricating oil and
level of oil to maintain in the gearbox.
When assembling the track drive on the machine and con-
necting the hoses, follow instructions shown in below
sketch for proper direction of rotation.
Direction of rotation
Oil port inlet Oil port outlet
Direction of
rotation (view
from motor)
P1
P2 Clockwise
P2
P1 Counterclock-
wise
Figure 3-158.