JLG X23J - X700AJ Service Manual - Manual (Page 551)

SECTION 6 - JLG CONTROL SYSTEM
6-62 – JLG Lift – 3121448
6.14 CALIBRATING JOYSTICK
This menu allows the calibration on Joystick replacement.
A NEW JOYSTIC WILL ACT AS IF IT IS AWATING FOLLOWING
PROCEDURE IS PERFORMED.
1. Engine and Electrical Motor OFF.
2. Press at the same time the 3 buttons below for at
least 7 seconds, until appear “JOY TEACH”.
3. Move each Joystick fully stroking on both direction.
4. Press Button 7 to escape.