JLG X23J - X700AJ Service Manual - Manual (Page 66)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-39
INFORMATION
BE CARE FUL TO THE CORRECT DIRECTION OF
ASSEMBLY.
Figure 3-93.
11. Insert the internal cover (31) sub assembly on the
timing shaft (36b) being careful that the axial bearing
(34) is properly placed on its seat.
Figure 3-94.
12. Apply a slight coat of grease on the O-ring seat on
the motor housing (36a).
Figure 3-95.
13. Place the O-ring seal (35) into its seat in the motor
housing (36a).
Figure 3-96.
14. Slide into the motor housing (36a) the timing shaft
+bearing + cover sub assembly.