JLG X23J - X700AJ Service Manual - Manual (Page 324)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-297
STARTER
Preliminary work:
– Disconnect the battery: negative pole first, positive pole
second.
– Disconnect cables as far as necessary.
Dismantling:
– Take out screw 1 with washer 2 and nut 3.
– Unscrew nut 4 with spring washer 5 and washer 6.
– Take off regulator switch 7 and bushing 8.
– Remove machine screw 9 with spring washer 10 and
washer 11; take off stirrup 12.
– Take out machine screws 13 with spring washers 14 and
washers 15; take off starter 16.
Testing / repair:
– Examine bearings and pinion for signs of wear or dam-
age.
– Check that pinion turns freely.
NOTE: Repairs to the starter motor should only be per-
formed by an authorised HATZ Service point.
Assembly:
– Follow the dismantling instructions in the reverse order.
– Restore the electrical connections.
– Reconnect the battery: first the positive pole and then
the negative pole.