JLG X23J - X700AJ Service Manual User Manual
Page 158

SECTION 3 - CHASSIS & TURNTABLE
3121448
– JLG Lift –
3-131
INNER FILTER (PAPER) TYPE:
Tap the inner filter (1) lightly several times on a hard sur-
face to remove excess dirt, or blow compressed air lightly
(207 kPa (2.11 kgf/cm
2
, 30 psi) or less) through the paper
filter from the inside out. Never try to brush the dirt off;
brushing will force dirt into the fibers.
Wipe dirt from the inside of the air cleaner case and the air
cleaner cover, using a rag.
Check the air cleaner case packing for deterioration or
damage. Make sure the air cleaner packing installed
securely.
Install the cleaner in the reverse order of removal.
SEDIMENT CUP CLEANING
GASOLINE IS HIGHLY FLAMMABLE AND EXPLOSIVE. YOU CAN
BE BURNED OR SERIOUSLY INJURED WHEN HANDLING FUEL.
• KEEP HEAT, SPARKS, AND FLAME AWAY.
• HANDLE FUEL ONLY OUTDOORS.
• WIPE UP SPILLS IMMEDIATELY.
Turn the fuel cock lever (1) to the OFF position.
Remove the sediment cup (2) and the O-ring (3).
Remove the cup filter (4) while releasing the tabs (5).
Clean the sediment cup and the cup filter with nonflamma-
ble solvent and allow them to dry thoroughly.
Install the cup filter as the direction shown in the illustra-
tion.
Install a new O-ring and tighten the sediment cup to the
specified torque.
TORQUE:3.9 N·m (0.40 kgf·m, 2.9 lbf·ft)
Check the installation part of the sediment cup for any
sign of fuel leakage.
(1)
(1)
OFF
ON
(3)
(2)
(4)
(5)
(5)
(5)
(5)
UNDER VIEW:
CARBURETOR
BOSS
BOSS