JLG X23J - X700AJ Service Manual - Manual (Page 452)

SECTION 5 - HYDRAULICS
5-26 – JLG Lift – 3121448
Second section seals replacement
Place on the body the new seals. Use clean grease to
keep the seal in place.
Figure 5-75.
Fit the new seal (1) and back-up ring (2) on the plate.
Figure 5-76.
First section seals disassembly
Remove the front cover.
Figure 5-77.
Using a marker draw a reference mark on the plate and
the body. It will be used later during reassembly.
Figure 5-78.
Remove the gears and the pressure plates.
Figure 5-79.
1 2