JLG X23J - X700AJ Service Manual - Manual (Page 72)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-45
2. By using a press and a metal stopper, push the
bearing (10) against the shoulder on the gearbox
housing (9) until assembly is complete.
Figure 3-119.
3. Assemble the spacer (11) on the gearbox housing
(9).
Figure 3-120.
4. By using pliers fit the circlip (12) into its seat in the
gearbox housing (9).
Figure 3-121.
5. Assemble the O-ring seal (13) into its seat in the
gearbox housing (9).
Figure 3-122.