JLG X23J - X700AJ Service Manual - Manual (Page 60)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-33
6. Remove the roller gerotor (40) together with the dist-
ibutor plate (39) to prevent the parts from falling out
(rolls ans stator).
Figure 3-66.
7. Split the distributor plate (39) from the roller gerotor
(40). From this one, remove the O-ring seal (38)
from its seat.
Figure 3-67.
8. Remove the O-ring seal (38) from the motor housing
(36a).
Figure 3-68.
9. Remove the 2 ball.
Figure 3-69.
10. Rimove the Seeger (30).
Figure 3-70.