JLG X23J - X700AJ Service Manual - Manual (Page 70)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-43
27. Place the 7 washers (42) and insert the 7 exagonal
head screws M8 (43), grade 10.9.
Figure 3-111.
28. Tighten the 7 exagonal head screws M8 (43) grade
12.9, by a torque wrench at 25 Nm torque.
INFORMATION
THIS IS ONLY A FIRST STEP TIGHTENING.
Figure 3-112.
29. Place the counterbalance valve on the hydraulic
motor.
Figure 3-113.
30. Fix the counterbalance valve to the hydraulic motor
by 2 flathead screws M5x45 (55) grade 10.9, tight-
ened by a torque wrench at 7,5 Nm torque.
Figure 3-114.