JLG X23J - X700AJ Service Manual - Manual (Page 456)

SECTION 5 - HYDRAULICS
5-30 – JLG Lift – 3121448
Cover seals replacement
INSERT THE SECOND SHAFT SEAL. PAY ATTENTION TO THE
ASSEMBLING DIRECTION OF THE SHAFT SEAL (SEE SECTION).
USING A MALLET PUSH ALL THE WAY DOWN THE CASAPPA
TOOL PN.06100091
Figure 5-90.
Insert the back-up ring.
Using a mallet push all the way down the CASAPPA tool
pn. 06100091.
Figure 5-91.
Second section components reassembly
Reassemble the gears and the plates. Use as reference
the mark made previously.
Figure 5-92.
Reassemble the rear cover.
Figure 5-93.