JLG X23J - X700AJ Service Manual - Manual (Page 455)

SECTION 5 - HYDRAULICS
3121448 – JLG Lift – 5-29
Cover seals replacement
Section
Figure 5-87.
Put the cover on the working bench.
Remove the snap ring (1).
Paying attention not to damage the seat remove with a
screw driver (flat head) the shaft seals.(2 - 3)
Put some clean grease into the seat seal.
Figure 5-88.
INSERT THE SHAFT SEAL. PAY ATTENTION TO THE ASSEMBLING
DIRECTION OF THE SHAFT SEAL (SEE SECTION). USING A MAL-
LET PUSH ALL THE WAY DOWN THE CASAPPA TOOL PN.
06100091.
Figure 5-89.
1
2
3