JLG X23J - X700AJ Service Manual - Manual (Page 112)

SECTION 3 - CHASSIS & TURNTABLE
3121448 – JLG Lift – 3-85
17. Insert the brake disc (M14) in the cylinder block (M16).
18. Assemble the cylinder block sub assembly (M16) into
the flanged hub (M2) on the motor shaft spline (M9).
19. Assemble the backup ring (M26) into its seat in the
brake piston (M27).
20. Assemble the O-ring seals (M25-M24) into its seat in
the brake piston (M27). Assemble the backup ring (M23)
into its seat as shown on the sketch below.
INFORMATION
THE O-RING (A) AND A THE BACKUP (B) RING MUST
BE FITTED IN THE SEAT ACCORDING THE MUTUAL
POSITION AS SHOWN IN THE SCHEME.