JLG X23J - X700AJ Service Manual - Manual (Page 543)

SECTION 6 - JLG CONTROL SYSTEM
6-54 – JLG Lift – 3121448
2 - MOTION ALARM
This menu allows the set ON or OFF of the motion alarm
with upper fame and undercarriage movements, or for
boom down only.
1. Press button 7 "SETUP“.
2. Press button 5 “PASSWORD”.
Using the remote control buttons to enter the pass-
word 8365.
NOTE: password above allow to choose the options shown
on the screen.
Once the correct password is accepted the display
shown “OK”.
3. Press button 9 “ESC”.
Repeat the above steps if “NO” appear on the dis-
play.
4. Press button 3”OPTIONAL”.
5. Press button 2 “BEEPER”.
6. Press button 1 ALL to actvate all movements.
7. Press button 2 “FALL to activate the descent move-
ments only”.
Press 4 times button 9 to Esc to escape.
3 - 2
ND
DRIVE SPEED
This menu allows to set ON or OFF of the high drive
speed on models with this option.
1. Press button 7 SETUP “.
2. Press button 5 “PASSWORD”.
Using the remote control buttons to enter the pass-
word 5216.
NOTE: password above allow to choose the options shown
on the screen.
Once the correct password is accepted the display
shown “OK”.
3. Press button 9 “ESC”.
Repeat the above steps if “NO” appear on the dis-
play.
4. Press button 3”OPTIONAL”.
5. Press button 3”D.SPEED”2 “.
6. Press button 1 ON to activate 2 ND DRIVE SPEED.
7. Press button 2 “OFF to deactivate the 2 ND DRIVE
SPEED.
Press 4 times button 9 to Esc to escape.
THE 2 ND DRIVE SPEED STANDARD ON X23J AND X700AJ ONLY