TOHO ELECTRONICS TTM200 - Manual (Page 215)

48-7009-E 6-67
6.10 Initial setting
■ Password input
SEt18
INIt
Setting content Initial value
1
PASS
(Blinking)
0000 to 9999
Change the 4-digit number and press the MODE key for canceling.
0000
To move to the initial setting mode, set the password.
A password is set for the product, key in the number in this screen, using the / key. Then, press the MODE key.
In the initial setting mode, the FUNC key is assigned for the digit shift function.
Key-in of the proper password number results in a move to the parameter setting of the initial setting mode.
Key-in of an improper password number results in a return to the SEt 18 screen.
■ PV normal display color
SEt18
INIt
Setting content Initial value
2 NdSP
0
1
2
3 Green
Red
Orange
Automatic (NdSP only)
0
Set the normal display color of PV.
Priority of the display colors is as follows.
1. PV normal display color (when NdSP = 3)
2. PV at-abnormality display color (E2dSP)
3. CT at-abnormality display color (E3dSP)
4. Loop at-abnormality display color (E4dSP)
5. PV at-event display color (E1dSP)
6. PV normal display color (when NdSP = 0 to 2)
Note For the PV normal display color (when NdSP = 3), the following functions are unavailable: the PV at-abnormality display
color, CT at-abnormality display color, loop at-abnormality display color and PV at-event display color.
■ PV color auto-display low
SEt18
INIt
Setting content Initial value
3 AdSL
0
1
2 Green
Red
Orange
1
■ PV color auto-display middle
SEt18
INIt
Setting content Initial value
4 AdSM
0
1
2 Green
Red
Orange
0
■ PV color auto-display high
SEt18
INIt
Setting content Initial value
5 AdSH
0
1
2 Green
Red
Orange
2