TOHO ELECTRONICS TTM200 - Manual (Page 104)

48-7009-E 5-34
■ Where contact outputs 3 and 4 are desired to be provided in sequence (Event * start)
Setting example where the output 3 is provided using the timer 1 and then the timer 2 starts operation
to provide the output 4 when the timer 1 terminates operation
SEt7/8
oUt3/4
Name Setting content Setting value
o3F Target connection setting Timer 1 output 5
o4F Target connection setting Timer 2 output 9
SEt14
tIME1
Name Setting content Setting value
tMF1 Function setting Auto-timer 1
oNt1 On delay timer 0 minute 00:00
oFt1 Off delay timer 1 minute 00:01
SEt15
tIME2
Name Setting content Setting value
tMF2 Function setting Event 3 start 10
oNt2 On delay timer 1 minute 00:01
oFt2 Off delay timer 1 minute 00:01
Power
supply
Off delay
1 minute
ON
OＦＦ
Output 3
ON
OＦＦ
On delay
1 minute
Output 4
ON
OＦＦ
Off delay
1 minute