TOHO ELECTRONICS TTM200 - Manual (Page 190)

48-7009-E 6-42
■ Secondary control loop abnormality time setting
SEt04
CNt
Setting content Initial value
50 LoP2 0 to 9999 (seconds) 0
Set the secondary control loop abnormality time setting.
The function is to detect an abnormality in the control loop.
- The control loop anomaly PV change threshold is judged at each “LoP2” time.
A loop abnormality is determined if each change threshold is judged to be equal to or below “PS2.”
For details, see section “Loop abnormality function” on pages 5-38 and 39.