TOHO ELECTRONICS TTM200 - Manual (Page 230)

48-7009-E 6-82
■ Zone Threshold＊ Setting
ＳＥｔ２３
ＺｂＮＫ
Setting Contents
Initial
Value
3 ＰＭ＊
Zone Threshold＊ Setting 3
1200
Setting Range
SV Limiter Lower Limit (SLL) to SV Limiter
Upper Limit (SLH)
(PM＊) will depend on the setting value of
bANKH
PM7 PM6～SLH
PM6 PM5～SLH
PM5 PM4～SLH
PM4 PM3～SLH
PM3 PM2～SLH
PM2 PM1～SLH
PM1 SLL～SLH
※ Setting of the Threshold is done for the Bank
Automatic Switching which will be done for ＊
= 1 to 7 (8 bank row).
※ When SET04 bANKH=0, the setting will be invalid.
There will be no indication either.
※ ３ Setting of the Threshold is done for the Bank Automatic Switching which will be done for the Zone
Threshold＊Setting (PM1 to PM7) ＜Max. 8 banks＞
Setting Range: SLL to SLH
Threshold can be set to max. of 7 (8 banks).
The initial value set is 1200 for PM1 to PM7. The bank switching by selected source will not be done.
NOTE: The setting range is PM＊SV Limiter Lower Limit (SLL) to SV Limiter Upper Limit, but when the
value of the PM(＊・1) is set exceeding the PM(＊), the PM (＊) will be changed together.
The selectable range of the Zone Threshold＊Setting (PM＊) will depend on the setting value of bANKH.
SET04
bANKH=
Selectable PM*
0 PM No Indication
1 * = 1
2 * = 1～2
3 * = 1～3
4 * = 1～4
5 * = 1～5
6 * = 1～6
7 * = 1～7
Note: the parameters indicated will vary depending on the value of SET04 BANKH.