TOHO ELECTRONICS TTM200 - Manual (Page 102)

48-7009-E 5-32
■ Where the control is desired to start/stop by pressing the FUNC key (manual start)
Example of setting for a control for 20 minutes at 180 °C, 2 hours after the FUNC key is pressed
SEt03
KEY
Name Setting content Setting value
FU1 Function key 1 function setting
No setting of time for the key held
pressed/timer start/reset
04
SEt04
CNt
Name Setting content Setting value
SV Control setting 180

C 180
Md Control mode Timer 1 makes the control start/stop. TIME1
SEt14
tIME1
Name Setting content Setting value
tMF1 Function setting Manual-start 2
oNt1 On delay timer 2 hours 02:00
oFt1 Off delay timer 20 minutes 00:20
ON
OＦＦ
RUN
RDY
180℃
Press FUNC key
Power
supply
Control
On delay
2 hours
Off delay
20 minutes
Temperature
Normal
temperature