ADTRAN 1000R Series - Manual (Page 97)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 97
debug atm packet
Use the debug atm packet command to activate debug messages associated with packets on ATM ports
and virtual circuits. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Variations of this command include the following:
debug atm packet
debug atm packet interface atm
debug atm packet interface atm vcd
debug atm packet vc
Syntax Description
interface atm Shows packets on a specific ATM port and on all virtual circuits.
vc Shows packets on a specific virtual circuit identified by the virtual path
identifier and virtual channel identifier (VPI/VCI).
vcd Shows packets on specific virtual circuit descriptors (VCD).
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example activates debug ATM packet debug messages on ATM port 1:
>enable
#debug atm packet interface atm 1