Reset – ADTRAN 1000R Series User Manual
Page 1170
Command Reference Guide
VLAN Database Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1170
reset
Use the reset command to discard all changes made and revert to the previous configuration. The prompt
remains in the VLAN Database.
Syntax Description
No subcommands.
Default Values
No defaults necessary for this setting.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1
Command was introduced.
Functional Notes
The reset command discards all changes to the VLAN configuration. The configuration remains the same
as it was prior to entering the VLAN Database Configuration (or since the last time you issued the apply
command). The VLAN Database reverts to the same state it had upon entry. See the command
for more information.
Usage Examples
The following example resets the unit to the previous configuration (i.e., the last configuration saved using
the apply or the exit command):
(config)#vlan database
(vlan)#reset
VLAN configuration has been reset.
(vlan)#