Dial-backup redial-delay
Page 948

Command Reference Guide

HDLC Command Set

61200510L1-35E

948

dial-backup redial-delay

Use the dial-backup redial-delay command to configure the delay after an unsuccessful call until the call
will be re-tried. For more detailed information on PPP dial-backup functionality, refer to the Functional
Notes and Technology Review sections of the command dial-backup call-mode [answer | answer-always |
originate | originate-answer | originate-answer-always]

Syntax Description

Specifies the delay in seconds between attempting to re-dial a failed backup
attempt. Range: 10 to 3600.

Default Values

By default, dial-backup redial-delay is set to 10 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1

Command was introduced.

Release 5.1

Command was expanded to include the PPP interface.

Usage Examples

The following example configures a redial delay of 25 seconds on this endpoint:

(config)#interface ppp 1

(config-ppp 1)#dial-backup redial-delay 25

Page 948