ADTRAN 1000R Series User Manual

Page 660

Command Reference Guide

Ethernet Interface Configuration Command Set

61200510L1-35E

660

switchport trunk fixed vlan [add l all l except l none l remove]

Use the switchport trunk fixed vlan command to change the configured list of VLANs that remain fixed
in use only when GVRP is enabled on the interface. Of these VLANs, VLANs statically created will be
available for use on the interface.

Syntax Description

add

Adds VLANs to the VLAN GVRP trunking fixed list.

all

Adds all VLANs to the VLAN GVRP trunking fixed list.

except

Adds all VLAN IDs to the VLAN trunking fixed list except those in the command
line VLAN ID list.

none

Removes all VLANs from the VLAN GVRP trunking fixed list.

remove

Removes VLAN from the VLAN trunking fixed list.

Specifies a valid VLAN interface ID (1 to 4094).

Default Values

By default, no VLANs are in the VLAN GVRP trunking fixed list (switchport trunk fixed vlan none).

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 8.1

Command was introduced.

Functional Notes

This command has no effect on VLAN membership configuration unless GVRP is enabled on the interface.