ADTRAN 1000R Series - Manual (Page 79)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 79
clear user [console | ssh |
telnet ]
Use the clear user command to detach a user from a given line.
Syntax Description
console Detaches a specific console user. Valid range is 0 to 1.
ssh Detaches a specific secure shell (SSH) user. Valid range is 0 to 4.
telnet Detaches a specific Telnet user. Valid range is 0 to 5.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example detaches the console 1 user:
>enable
#clear user console 1