Speed
Page 543

Command Reference Guide

Line (Console) Interface Config Command Set

61200510L1-35E

543

speed

Use the speed command to specify the data rate for the

CONSOLE

port. This setting must match your

VT100 terminal emulator or emulator software. Use the no form of this command to restore the default
value.

Syntax Description

Specifies rate of data transfer on the interface (2400; 4800; 9600; 19,200; 38,400;
57,600; or 115,200 bps).

Default Values

By default, the speed is set to 9600 bps.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.

Command History

Release 1.1

Command was introduced.

Usage Examples

The following example configures the CONSOLE port for 19200 bps:

(config)#line console 0

(config-con 0)#speed 19200

Page 543