Switchport mode [access, Trunk, Switchport mode [access | trunk – ADTRAN 1000R Series User Manual

Page 1032

Text mode
Original mode

Command Reference Guide

Port Channel Interface Config Command Set

61200510L1-35E

1032

switchport mode [access | trunk]

Use the switchport mode command to configure the VLAN membership mode. To reset membership
mode to the default value, use the no version of this command.

Syntax Description

access

Sets port to be a single (non-trunked) port that transmits and receives no tagged
packets.

trunk

Sets port to transmit and receive packets on all VLANs included within its VLAN
allowed list.

Default Values

By default, this is set to access.

Applicable Platforms

This command applies to the NetVanta 300, 1000, and 1000R Series units.

Command History

Release 5.1

Command was introduced.

Usage Examples

The following example sets the port to be a trunk port:

(config)#interface port-channel 1

(config-p-chan 1)#switchport mode trunk