ADTRAN 1000R Series User Manual
Page 1303
Command Reference Guide
Router (OSPF) Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1303
area range
not-advertise]
Use the area range command to configure area route summarizations and to determine whether an address
range is advertised to the networks.
Syntax Description
Specifies an identifier for this area. Specifies as an integer (range: 0 to
4,294,967,295) or an IP address
Specifies the IP address of the advertised summary route.
Specifies the mask of the advertised summary route.
advertise
Specifies the specified address range will be advertised to other networks.
not-advertise
Specifies the specified address range will not be advertised to other networks.
Default Values
By default, OSPF is not enabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Command was introduced.
Usage Examples
The following example defines an address range for a specific area that allows the unit to advertise this
range to other networks:
(config)#router ospf
(config-ospf)#area 11.0.0.0 range 11.0.0.0 255.0.0.0 advertise