Dial-backup maximum-retry Page 1124
Page 1124
Command Reference Guide
Tunnel Configuration Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1124
dial-backup maximum-retry
Use the dial-backup maximum-retry command to select the number of calls the router will make when
attempting to backup a link. Use the no form of this command to return to the default state. For more
detailed information on PPP dial-backup functionality, refer to the Functional Notes and Technology
Review sections of the command dial-backup call-mode [answer | answer-always | originate |
originate-answer | originate-answer-always]
Syntax Description
Selects the number of call retries that will be made after a link failure (valid range:
0 to 15).
Setting this value to 0 will allow unlimited retries during the time the network is
failed.
Default Values
By default, dial-backup maximum-retry is set to 0 attempts.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Command was introduced.
Release 5.1
Command was expanded to include the PPP interface.
Usage Examples
The following example configures the AOS to retry a dial-backup call four times before considering backup
operation not available:
(config)#interface ppp 1
(config-ppp 1)#dial-backup maximum-retry 4