Command descriptions, D to command descriptions, Of this guide – ADTRAN 1000R Series User Manual
Page 14
![background image](/manuals/36101/14/background.png)
Command Reference Guide
Command Descriptions
61200510L1-35E
Copyright © 2005 ADTRAN
14
COMMAND DESCRIPTIONS
This portion of the guide provides a detailed listing of all available commands for the ADTRAN OS CLI
(organized by command set). Each command listing contains pertinent information including the default
value, a description of all sub-command parameters, functional notes for using the command, and a brief
technology review. To search for a particular command alphabetically, use the Index at the end of this
document. To search for information on a group of commands within a particular command set, use the
linked references given below:
Global Configuration Mode Command Set
Line Interface Command Sets
Line (Console) Interface Config Command Set
Line (SSH) Interface Config Command Set
Line (Telnet) Interface Config Command Set
Physical Interface Command Sets
ADSL Interface Config Command Set
BRI Interface Configuration Command set
DDS Interface Configuration Command Set
DSX-1 Interface Configuration Command Set
E1 Interface Configuration Command Set
Ethernet Interface Configuration Command Set
G.703 Interface Configuration Command set
Modem Interface Configuration Command Set
Serial Interface Configuration Command Set
SHDSL Interface Configuration Command Set
T1 Interface Configuration Command Set
Virtual Interface Command Sets
ATM Interface Config Command Set
ATM Sub-Interface Config Command Set
Demand Interface Configuration Command Set
Frame Relay Interface Config Command Set
Frame Relay Sub-Interface Config Command Set
Loopback Interface Configuration Command Set
Port Channel Interface Config Command Set
PPP Interface Configuration Command Set
Tunnel Configuration Command Set
VLAN Configuration Command Set
VLAN Database Configuration Command Set