ADTRAN 1000R Series - Manual (Page 157)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 157
reload [cancel | in ]
Use the reload command to preform a manual reload of the AOS.
Syntax Description
cancel Optional. Deactivates a pending reload command.
in Optional. Specifies a delay period the AOS will wait before reloading.
Specifies the delay period in minutes (mmm) or hours and minutes (hh:mm).
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example reloads the AOS software in 3 hours and 27 minutes:
>enable
#reload in 03:27
The following example reloads the AOS software in 15 minutes:
>enable
#reload in 15
The following example terminates a pending reload command:
>enable
#reload cancel
Performing an AOS reload disrupts data traffic.