ADTRAN NetVanta ADSL User Manual
Wan-adsl (rj-11c) p
NetVanta ADSL Network Interface Module (ADSL over ISDN) P/N
1202889E1
For more detailed documentation, visit us online at
Quick Start Guide
®
Quick Start Guide, 61202889E1-13A, November 2006
Copyright © 2006 ADTRAN, All Rights Reserved
WAN-ADSL
DBU
I
NSTALLATION
I
NSTRUCTIONS
1.
Remove power from the base unit.
2.
Slide the option module into the option slot until the module is
firmly seated against the chassis.
3.
Secure the pins at both edges of the module.
4.
Connect the cables to the associated device(s).
5.
Complete installation of the base unit.
6.
Restore power to the unit.
For NetVanta modules with outside plant
connections, ensure that all cables are
removed from the module before installing
or removing it from the NetVanta chassis.
WAN-ADSL (RJ-11C) P
INOUTS
Pin
Name
Description
1, 2
—
Unused
3
R
Network - Ring
4
T
Network - Tip
5, 6
—
Unused
An optional Dial Backup Interface Module (DIM) is
required for dial backup applications.
For a description of the DBU pinouts, refer to the
Quick Start Guide included with your DIM
shipment.
Important: For additional details on product
features, specifications, installation, and safety, refer
to the appropriate Hardware Installation Guide on
the ADTRAN OS System Documentation CD
shipped with the base unit and available online at
www.adtran.com.
S
PECIFICATIONS
ADSL Interface
ADSL over ISDN, Annex B
Supported Standards:
ITU-T G.992.1 Annex B
ITU-T G.992.3 Annex B ADSL2
ITU-T G.992.5 Annex B ADSL2+
Connector: RJ-11C (6-pin jack, inner pair)
Dying Gasp (NetVanta 3200 only)
ATM
Multiple Protocol over AAL5 (RFC2684)
PPP over ATM (RFC2364)
PPP over Ethernet (RFC2516)
ATM Forum UNI 3.1/4.0 PVC
ATM Class of Service (UBR)
ATM F5 OAM
Up to 16 Virtual Circuits
Compliance
FCC Part 15 Class A, EN 55022 Class A, EN 55024,
EN 61000-3-2, EN 61000-3-3
AS/ACIF S043
EN 60950, IEC 60950, AS/NZS 60950
RoHS compliant, Telecommunications Exemption
Physical
Dimensions: 2.75-inch W x 4.25-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, noncondensing
NetVanta modules should be installed only in NetVanta
Series products.