ADTRAN 1000R Series - Manual (Page 297)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 297
Usage Examples
The following is sample output using the show spanning-tree realtime command.
>enable
#show spanning-tree realtime
-------------------------------------------------------------------------------------------------
STP 0
Vlan 1
Spanning Tree enabled protocol ieee 802.1w (Rapid Spanning-Tree)
Root ID Priority 8894
Address 00:a0:c8:00:f5:52
Cost 46
Port 1 (giga-eth 0/1)
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address 00:a0:c8:02:f6:6b
Aging Time 300
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------------------------------
giga-eth 0/1 Root FWD 19 128.1 P2p
giga-eth 0/5 Altn BLK 19 128.5 P2p
-----------------------------------------------------------------------------------------------------
Exit - 'Ctrl-C', Freeze - 'f', Resume - 'r'