ADTRAN 1000R Series - Manual (Page 335)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 335
aaa authentication port-auth default [group | group
radius | local | none]
Use the aaa authentication port-auth default command to create a default list for port authentication. For
more detailed information on AAA functionality, refer to the Technology Review section of the command
aaa on
on page 340 .
Syntax Description
group Specifies a group of remote servers to use for authentication.
group radius Specifies using all defined RADIUS servers for authentication.
local Specifies using the local user database for authentication.
none Automatically grants access.
Default Values
The login list named default is the default list used to authenticate users when no other list is assigned to
the line.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example specifies that the local user database be used for port authentication:
(config)#aaa authentication port-auth default local