ADTRAN 1000R Series - Manual (Page 235)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 235
Usage Examples
The following is sample output from the show ip policy-sessions command:
>enable
#show ip policy-sessions
Protocol (TTL)
Src IP Address Src Port Dest IP Address Dst Port NAT IP Address NAT Port
--------------------------------------------------------------------------------------------------------------------------------
Policy class "Public":
tcp (13)
192.168.1.142 2621 192.168.19.2 1 10.10.10.1 3000
tcp (13)
192.168.1.142 2622 192.168.19.2 2 10.10.10.1 3001
tcp (13)
192.168.1.142 2623 192.168.19.2 3 10.10.10.1 3002
tcp (13)
192.168.1.142 2624 192.168.19.2 4 10.10.10.1 3003
The following is sample output from the show ip policy-sessions all command:
>enable
#show ip policy-sessions all
Protocol (TTL)
Src IP Address Src Port Dest IP Address Dst Port NAT IP Address NAT Port
-------------------------------------------------------------------------------------------------------------------------------------------
Policy class "Public":
tcp (0) - inactive
192.168.1.142 1025 192.168.19.2 3135 10.10.10.1 3605
tcp (0) - inactive
192.168.1.142 1028 192.168.19.2 3138 10.10.10.1 3606
tcp (0) - inactive
192.168.1.142 1029 192.168.19.2 3139 10.10.10.1 3607
tcp (0) - inactive
192.168.1.142 1036 192.168.19.2 3146 10.10.10.1 3608