ADTRAN 1000R Series - Manual (Page 231)

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 231
show ip ospf neighbor [detail]
Use the show ip ospf neighbor command to display open shortest path first (OSPF) neighbor information
for a specific interface.
Syntax Description
Optional. Displays the interface type. Type show ip ospf neighbor ? for a complete
list of applicable interfaces.
Optional. Specifies a specific neighbor’s router ID.
detail Optional. Displays detailed information on all neighbors.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Release 9.1 Command was expanded to include HDLC and tunnel interfaces.
Usage Examples
The following example shows detailed information on the OSPF neighbors:
>enable
#show ip ospf neighbor