ADTRAN 1000R Series User Manual
Page 1263
Command Reference Guide
IKE Policy Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
1263
client authentication host xauth-type [generic | otp | radius]
Use the client authentication host xauth-type command to allow the user to specify the Xauth
authentication type if a type other than generic is desired.
Syntax Description
generic
Specifies generic authentication type.
otp
Specifies OTP authentication type.
radius
Specifies RADIUS authentication type.
Default Values
By default, this is set to generic.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Command was introduced.
Functional Notes
This command is used along with the client authentication host username. Refer to
for more information. When acting as an Xauth host, this command allows
the user to specify the Xauth authentication type if a type other than generic is desired.
Usage Examples
The following example sets the Xauth type to radius:
(config-ike)#client authentication host xauth-type radius