ADTRAN 1000R Series - Manual (Page 386)

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 386
ftp authentication
Use the ftp authentication command to attach AAA login authentication lists to the FTP server (refer to
aaa authorization commands [ | default] [group | group tacacs+ |
if-authenticated | none]
on page 336 for more information). This list is only used if the AAA subsystem
has been activated with the aaa on command.
Syntax Description
Specifies the named list created with the aaa authentication login command.
Enter default to use the AAA default login list.
Default Values
There is no default configuration for the list. If AAA is turned on but no ftp authentication list has been
assigned, FTP denies all login attempts.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example attaches the authentication list, MyList, to the FTP server:
(config)#ftp authentication MyList
The following example specifies that the AOS use the default AAA login list for FTP authentication:
(config)#ftp authentication default