ADTRAN 1000R Series - Manual (Page 655)

Command Reference Guide Ethernet Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 655
switchport port-security expire [time > l type absolute]
Use the switchport port-security expire command to disable an interface after a specified amount of
time.
Syntax Description
time Enables port expiration by configuring a time (in minutes). Disable by setting time
to 0.
type absolute Configures the interface to shut down after the specified time, regardless of
activity.
Default Values
By default, this command is disabled and set to type absolute.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example disables Ethernet interface 0/1 after 10 minutes:
(config)#interface eth 0/1
(config-eth 0/1)#switchport port-security expire time 10