Logging facility Page 468
Page 468
Command Reference Guide
Global Configuration Mode Command Set
61200510L1-35E
Copyright © 2005 ADTRAN
468
logging facility
Use the logging facility command to specify a syslog facility type for the syslog server. Error messages
meeting specified criteria are sent to the syslog server. For this service to be active, you must enable log
forwarding. Refer to logging forwarding on
for related information. Facility types are
described under Functional Notes below. Use the no form of this command to return it to its default
setting.
Syntax Description
Specifies the syslog facility type (refer to Functional Notes below).
Default Values
The default value is local7.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1
Command was introduced.
Functional Notes
The following is a list of all the valid facility types:
auth
Authorization system
cron
Cron facility
daemon
System daemon
kern
Kernel
local0 - local7
Reserved for locally-defined messages
lpr
Line printer system
Mail system
news
USENET news
sys9 - sys14
System use
syslog
System log
user
User process
uucp
UNIX-to-UNIX copy system